Intelligent lighting incubator application and maintenance

Shanghai Xinzhuang Light Incubator Use: Microcomputer automatic control, touch switch, easy to operate; programmable multi-segment control mode, temperature, humidity, illuminance and time can be set separately during day and night. Air duct ventilation, studio wind speed is gentle, temperature is uniform; hollow reflective tempered film glass, good thermal insulation performance, beautiful appearance. Fully enclosed opaque lampshade, optional studio power supply, disinfection device, etc.

Instructions for use

1. Turn on the power, close the power switch, power on the whole machine, and the power indicator in the switch is on.

2. Please refer to the manual of intelligent digital temperature controller for temperature control setting.

3. If you need lighting, turn on the light switch.

4. This incubator has a breakpoint protection function and a delay function of about one and a half minutes. It takes about one and a half minutes to start again after the compressor stops.

Maintenance and maintenance

1. The incubator housing should be reliably grounded.

2. The incubator should be placed in a cool, dry, well-ventilated place away from heat and sunlight. Place it smoothly to prevent noise from occurring.

3. In order to ensure the effective heat dissipation of the condenser, the distance between the condenser and the wall should be greater than 100mm. There should be a 50mm gap on the side of the box and at least 300mm on the top of the box.

4. When the incubator is transported, repaired and maintained, it should avoid collision, shaking and shaking; the maximum inclination is less than 45 degrees.

5. The instrument suddenly does not work. Please check whether the fuse tube (after the box) is burnt out and check the power supply.

6. When the incubator is working in refrigeration, it is not advisable to make the difference between the temperature inside the box and the ambient temperature greater than 25 degrees.

Shanghai Xinzhuang Instrument Co., Ltd. develops the LNB brand carbon dioxide incubator, which is energy-saving and environmentally friendly and domestically leading. Professional manufacturing is more secure and affordable.

MDF board price , Plain Mdf sheet prices , raw mdf

1. MDF, full name is Medium Density Fiber Board. Raw MDF is also called Plain MDF.

2. We have Raw(plain) MDF, Melmaine faced MDF, Wood veneer faced MDF, UV coated MDF,

    HPL coated MDF, slotted MDF

Type of MDF MDF for furniture,Door Skin MDF,flooring MDF
Surface veneer varity melamine, veneer, plain, etc
Size(mm) 1220*2440(4'*8')or as request
Main material poplar,hardwood
Thickness 2-44mm
Thickness tolerance ±0.5mm
Grade First grade
Moisture 5%-8%
Density 680-850kg/m³
Usage used for painting interior door leaf,furniture,wall decoration etc.
MOQ 20'GP about 22 cubic meters
Sample available for free(not including the fright cost)
Quantity 20'GP,8pallets/ 22m³
40'GP,16pallets/ 48m³
40'HQ,18pallets/53m³
Payment terms L/C at sight,T/T
Capacity 5000-10000 cubic meter/Month

Plain MDF

Plain MDF,Plain MDF Board,Furniture Plain MDF,Melamine Raw Plain MDF Board

Shouguang Bailing Wood Industry Co., LTD. , https://www.bailingfurniture.com